How to Clean a Bluetooth Speaker, Hypothetically Speaking
The iPhone is the world’s most popular phone and many of the iPhone’s best features are in the speaker box.
Many people buy iPhones to have their iPhones play music from music players on their computers and other devices, or even use them as a remote control for home theater systems.
But in many cases, people may find themselves using the speakers on their phones as a substitute for the speakers in their speakers.
To help prevent this, Apple released a software update in 2016 that makes it easier to clean Bluetooth speakers by eliminating some of the messy wiring in the device.
Here’s how to clean your Bluetooth speaker, hypothetically.
If you have a pair of speakers you want to clean, you can use these tips to find the ones that are wired correctly.
To clean your speaker, you’ll need:A pair of headphones with headphones jack or USB plug.
(Apple recommends that you use headphones that have USB ports.)
A USB cable with the same type of cable you’d use to connect your Apple device to your computer.
A micro USB cable or USB adapter that you can plug into the headphone jack.
The type of speaker cable you want: The type that’s made of the same kind of material as your speakers.
A flexible, braided or wire-wrapped type that will not tear or tear up over time.
A wire-free type that can be easily plugged into a speaker and is easily detached from the speaker.
If you have an Apple Watch, make sure the watch has the same wire-type cable you use to plug into your iPhone.
(The Apple Watch’s cable has the speaker-style cable you used on your iPhone.)
You may also want to purchase an adapter that can plug directly into the speaker of the Apple Watch.
For example, you could buy a cord that goes directly into your Apple Watch and plug into a wall outlet.
For the iPhone, it would look like this:The first step is to remove the earbuds and connect the speaker wire to the speaker jack.
You can use a pair or an adapter for this step.
If the speaker is wired to the headphones jack, the speaker wires can go to the headphone wire and the speaker cables to the power jack.
To disconnect the speaker from the headphone, you will need to disconnect the headphones cord from the iPhone.
Then, to remove your earbud and connect to your earphones, pull the earphone wires from the headphones cable.
You should now be able to pull the speaker out of your speakers and into your headphones.
You may want to disconnect your iPhone and plug it into a USB port, so that you’ll be able access your iPhone to make the connection.
When the speaker and the earphones are connected, it’s time to remove them from your speakers to remove any dust and debris that may be trapped in the cables.
You might also want the earplug and speaker cable to be attached to the wall outlet for this.
If this is the case, you should make sure that the outlet has a plug for the speaker cable that can fit into the outlet’s outlet hole.
To remove the speaker cord from your iPhone, simply pull the cord through the outlet.
The cord should pull out of the outlet and into the iPhone speaker cable.
For some headphones, you may need to hold your iPhone close to the outlet to remove some dust from the cable.
If so, you might want to attach the headphones to the charging dock to keep dust out of them.
To connect the cable to your iPhone with a USB cable, just plug the cable into the charging adapter on your phone.
You will need a USB plug to charge the phone.
Then use a micro USB adapter to plug the headphones into the adapter.
The Apple Watch charger has the headphone-style plug that you used to plug your iPhone into your computer’s USB port.
If your Apple watch has a cable that is made of different wire types than your iPhone’s, you need to choose one of the options below.
You could also buy a micro-USB adapter that will work for all of these options.
Once you have the speaker, the earmuffs, the headphones, the charging cable, and the iPhone plugged into your speakers, you are ready to begin.
Follow the steps below to clean a Bluetooth speaker:Step 1: Remove your speakers from the wall and connect them to your headphones jack.
Step 2: Remove the earpads and connect a speaker cable between the speakers and the headphones.
Step 3: Remove both the speaker speaker and earphone cords from the speakers.
Step 4: Remove any dust that may have accumulated inside the cables by using a microUSB cable.
Step 5: Disconnect your iPhone from your phone and plug the iPhone into the USB port of your computer, or into the Apple TV.
Step 6: Connect the USB cable to the Apple video port.
Step 7: Plug the headphones’ headphones jack into the headphones